Model PKD
Liquid sensor which thoroughly pursues simple model, simple system, and low cost.
The diaphragm at the center of flange detects liquid pressure proportional to the liquid level. The semiconductor pressure transducer converts liquid pressure into current signal, and output 4 to 20mA DC.Features of Model PKDLow cost by simplified performance and function.
Output signal: 4 to 20mA DC (Two wire system).
Flat face avoid residual liquid.
Achieve weight saving by using plastic flange material.
No need a jig of sensor support for installing to FRP tank.
Wide variety of flange material to suite medium.
Plastic flange for waste water or chemical tank, etc.: PP / PVC / CPVC.
Metal flange for purified water, etc.: 304SS / 316SS.
No need Teflon film sheet due to the plastic flange of high corrosive resistance.
Possible to cut down the total cost.
No need a jig of sensor support and Teflon film sheet.
Improvement of work-ability at site.
Possible to measure without adjustment and setting.
Possible to set a measuring range before shipment.
Measuring range: 0 to 4m / 0 to 10m.
Main Specification of Model PKD
Medium: Water, Non-corrosive liquid
Supply power: 24 V DC ±10%
Output signal: 4 to 20mA DC, 2-wire system
Measuring range: 0 to 4m or 0 to 10m
Sensitivity: ±0.5% F.S.
Operating Temp.: 0 to 70 ℃ for detection face
Diaphragm material: 0 to 50 ℃ for housing (without dew)
Mounting: JIS10K50A FF (Standard)
Special Notice
Model PK has been change into model PKD since June 3rd, 2014.
Downloads:
Catalog: Model PK English Catalog 2013 Edition
Leaflet: Model PKD English Leaflet January 9th, 2015 Rev. 0
Drawing:
PKD120S Drawing | PKD120S6 Drawing | PKD120P Drawing
PKD120V Drawing | PKD120HV Drawing
Specification:
PKD120S Specification | PKD120S6 Specification | PKD120P Specification
PKD120V Specification | PKD120HV Specification
Manual:
PKD Manual, June 3rd, 2014